DGTA07BDC - Coleman furnace

[lehrbob007]

my furnace lights and stays lit. chamber heats normally. when at correct temp fan goes on/off in 1 second cycles continuously. when chamber gets too hot breaker switch with red push button pops up, since not enough heat evacuated, and burner goes out. that was last nite. tonite fan doesn't run at all and after 10 minutes of full burner red button breaker pops and burner is shut off. 42 degrees in house this morn! just enough income to be disqualified for energy assistance and repair!

[Robert]

Fan Switch # 7975-3281 @ $13.21 + $6.75 shipping .

This is most likely the problem.


If interested, please order through Paypal from left side here:

http://www.mobilehomerepair.com/ColemanGas.html


OR, call toll free to 1-877-263-7860 between 9A/5P CST Mon thru Fri and charge to Visa or Mastercard.


More info needed if you're in Canada so let us know.



You can jumper the switch to see if it works proper with it jumpered, if so, replace it.


Thanks for inquiring,
Robert