Heat strips are on, but not the fan.

Questions about repairs and parts for Coleman furnaces, air conditioners and heat pumps for manufactured homes. Click here for Coleman parts.

Moderators: Greg, Mark

Post Reply
Forestbrook
Posts: 1
Joined: Thu Dec 06, 2018 8:36 pm

Hello everyone!
I am having some serious problems with my Coleman furnace. Last spring, the fuse box caught fire and burned up many of the lower wires along with the sequencers. I was able to get the air conditioning working again with some help from my cousin, an electrition. We knew then that the sequencers would need to be replaced in order for me to have heat. I have installed the sequencers and the heat strips turn on just fine. The problem I'm having is that the fan will not come on. Can anyone tell me what needs to be connected in order for the fan to start? The fan runs fine for a/c but never attempts to start for heat. Also the fan switch is bypassed to always on "auto", so I cannot run it that way. Thanks in advance
Post Reply
  • Similar Topics
    Replies
    Views
    Last post