7681-3231 Damper motor

Questions about repairs and parts for Coleman furnaces, air conditioners and heat pumps for manufactured homes. Click here for Coleman parts.

Moderators: Greg, Mark

Post Reply
minnie1967
Posts: 22
Joined: Sun Sep 14, 2014 8:05 pm

Before I buy one, is there an installation guide?
minnie1967
Posts: 22
Joined: Sun Sep 14, 2014 8:05 pm

Took it apart, of course the motor was on the back side. I removed the 3 screws holding the stack to the furnace and rotated the whole piece. Remove the 2 smaller Philips screws, pay attention to how it's mounted. The armature for the motor has a hole in it for the spring that pulls the damp closed. It gets reattached from the backside of the armature. The armature is like a U at the end. Slide the motor down and out. Insert the damper arm into the U on the armature after reattaching the spring, and hole the armature at the 12 O'clock position/up and realign the screws.
Post Reply
  • Similar Topics
    Replies
    Views
    Last post