Search found 5696 matches
- Fri Apr 10, 2020 8:54 am
- Forum: Mobile Home Repair
- Topic: Replacing Piers on 1973 Mobile Home
- Replies: 6
- Views: 13173
Re: Replacing Piers on 1973 Mobile Home
I personally don't like that (pointed) style of pier, I would rather have a full block. An inspection should only take an hour or two to do (plus travel time to be fair) I would say 6 hrs should be plenty of time the change & relevel ALL of the piers, unless they are adding a tie down system. Th...
- Thu Apr 09, 2020 9:05 am
- Forum: Mobile Home Repair
- Topic: Replacing Piers on 1973 Mobile Home
- Replies: 6
- Views: 13173
Re: Replacing Piers on 1973 Mobile Home
Without pictures it is impossible to say.
To add pictures use the "full editor" and add the files. you may have to resize them if they are too large.
Greg
To add pictures use the "full editor" and add the files. you may have to resize them if they are too large.
Greg
- Wed Apr 01, 2020 5:02 pm
- Forum: Mobile Home Repair
- Topic: Sửa chữa, cải tạo nội thất chung cư cần lưu ý gì - Nội Thất Tứ Gia
- Replies: 3
- Views: 12242
Re: Crawl Space Venting
The code states 1sq/ft of ventilation per every 150sq/ft of floor space. I don't think I have ever seen a formula for power vented. During warm weather I don't think you can have too much ventilation. For leaks, all you can do is a close inspection or pressurize the system with a gauge and watch it....
- Thu Mar 05, 2020 6:11 pm
- Forum: Mobile Home Repair
- Topic: Leak detector on water meter spins back and forth
- Replies: 2
- Views: 26082
Re: Leak detector on water meter spins back and forth
I would contact the park and ask them. I have never had a submeter.
Greg
Greg
- Mon Mar 02, 2020 7:59 am
- Forum: Mobile Home Repair
- Topic: Moving my HW tank outside.
- Replies: 2
- Views: 25038
Re: Moving my HW tank outside.
I can't see any reason as far as federal HUD regulations, but there may be local codes involved so check with your code officer first.
Greg
Greg
- Sun Mar 01, 2020 7:08 pm
- Forum: Mobile Home Repair
- Topic: Metal exterior wall/ ceiling panels?
- Replies: 3
- Views: 14675
Re: Metal exterior wall/ ceiling panels?
You may be able to resize with your camera settings.
Greg
Greg
- Sat Feb 29, 2020 8:27 am
- Forum: Mobile Home Repair
- Topic: Metal exterior wall/ ceiling panels?
- Replies: 3
- Views: 14675
Re: Metal exterior wall/ ceiling panels?
It is hard to say without seeing them, but they sound like the panels may have been some type of kit addition pre made just assemble on site. you could try some low expansion foam if you can get to the void.
Pictures need to be resized to post here, most picture programs have that feature.
Greg
Pictures need to be resized to post here, most picture programs have that feature.
Greg
- Fri Feb 14, 2020 8:58 am
- Forum: Mobile Home Repair
- Topic: Buying used - Single wide vs Double wide
- Replies: 7
- Views: 26316
Re: Buying used - Single wide vs Double wide
I say PLAN because one thing leads to another, open up the floor and you end up with wall damage. open up belly you usually find insulation and possibly floor & rim joist damage. I have seen many people go in to do one thing and end up finding MUCH more and end up dumping a pile of money into it...
- Thu Feb 13, 2020 5:34 pm
- Forum: Mobile Home Repair
- Topic: Buying used - Single wide vs Double wide
- Replies: 7
- Views: 26316
Re: Buying used - Single wide vs Double wide
It would need to be releveled at the least. Plan on a total overhaul, with new under belly and heat ducts.
Greg
Greg
- Wed Feb 12, 2020 5:40 pm
- Forum: Mobile Home Repair
- Topic: Buying used - Single wide vs Double wide
- Replies: 7
- Views: 26316
Re: Buying used - Single wide vs Double wide
Check with your code officer and check the requirements if any.
Greg
Greg
- Wed Feb 12, 2020 5:37 pm
- Forum: Mobile Home Repair
- Topic: two wire thermostat question
- Replies: 4
- Views: 15398
Re: two wire thermostat question
If you have 2 wires now any 2 wire should work. I think the colors are labeled on the back of the thermostat.
Greg
Greg
- Tue Feb 11, 2020 5:40 pm
- Forum: Mobile Home Repair
- Topic: Buying used - Single wide vs Double wide
- Replies: 7
- Views: 26316
Re: Buying used - Single wide vs Double wide
I think the problem would lie with the installer. If you have a quality installation on a quality foundation the problems would be minimal. A cheap hack job with the home just set on blocks would be more prone to problems.
Greg
Greg
- Sat Feb 08, 2020 9:37 am
- Forum: Mobile Home Repair
- Topic: plastic vapor barrier no attic vents
- Replies: 1
- Views: 29741
Re: plastic vapor barrier no attic vents
The problem with metal roofs is that you WILL have condensation. it is how it is handled is the difference. I wish I could say "all you have to do is....." Spray foam insulation is a solution that I hear works, but gets expensive fast. Plastic can contain the moisture, but you need ventila...
- Fri Feb 07, 2020 2:28 pm
- Forum: Mobile Home Repair
- Topic: Can I block up rim joist to level rim joist
- Replies: 1
- Views: 30030
Re: Can I block up rim joist to level rim joist
You may need to run a straight line across the floor. You may find the joists are bowed down from excessive weight on the roof. You can try jacking but often the joists are permanently bent and when you jack the rim, the frame will lift with the I beam. You may find that you need to cut a tapered 2x...
- Wed Feb 05, 2020 6:17 pm
- Forum: Mobile Home Repair
- Topic: Roof Condensation
- Replies: 1
- Views: 7295
Re: Roof Condensation
Metal roofs & condensation seem to go hand in hand, it is usually a major pain. The porch may be the easiest. I used vinyl soffit on the bottom of mine, any condensation drips on to it and with a slight pitch gust runs off to the side. Ventilation is about the only way to prevent condensation on...