Thank you

HouseMedic, Thank you for the pic it helps a lot. Is all your piping 1 1/4" and then you have a coupler at the end of your P-trap to enlarge your pipe to 1 1/2" or is it all 1 1/2". If it isn't 1 1/4" is it ok to use 1 1/4" piping till I get to the main drain or do I have to...

Is the double sink drain kit the same kit you'd use for a kitchen?

Do I have to use one p trap or two?

Not sure how to hook up a drain for new double sink in the bathroom. As always any help is really appreciated. As you can see in the picture the drain has to go behind drawers. I can only take a pic of the one drain but there is another one on the far left.

I can hear a chewing noise in my wall which is why I am writing this right now. Not sure if it is a mouse or what. What do I do? Do I have to rip open the wall? It sounds like its in the middle of my bedroom wall. I banged the wall and it stops but then starts up again in 10 minutes.

Ordered p-trap and book today!

HouseMedic, They told me they don't make them anymore and sold us a p-trap that is opposite than what is already on the drain pipe which means I would have had to cut off the female end of the p-trap. Thanks so much for the link. I just have a couple questions before I quit posting to this. I did bu...

MH store doesn't sell this style of P-trap. Is this type still available?
The beveled edge is on the bottom and the threaded edge is glued to the drain pipe. If not I guess I'll have to do some cutting underneath. Was trying to avoid that cause there's two drain pipes next to each other.

Well I got under there and grabbed a good light and was able to see the drain much better. There wasn't a nut like I thought. All I had to do was unloosen the nut on the P-trap and then I was able to turn the entire drain. I bought a drain tool from harbor freight but still couldn't get the top drai...

Thank you for the reply. I was just going to post that I looked at the above posted link and saw the drain tool. To get the nut off the bottom what do you suggest to use? A spanner wrench maybe? Not much room under there. Also, is the drain glued into the drain elbow or just screwed in. So sorry for...

JD, Drain tool? Not sure what tool you are talking about. I went under the home today and wasn't sure exactly where the drain was till I saw a square piece of tin screwed under there. I unscrewed that and cut a slit in the home apron and water fell out. I was able to see the drain connections. It lo...

Is it ok to use 2 x 4's or do I have to use 2 x 6's? It's not going to be easy adding boards to the 2 x 6's on the ends. Any suggestions?

How does this bathtub drain come off? What kind of replacements do people use?

An area in front of the tub was soft so I cut it out. It is not rotted out under the tub. As you can see in the pics the edges next to the tub aren't a very clean cut. Didn't have a sawzall so the cuts are jagged. Am I going to have to nail or screw some boards perpendicular to the floor boards unde...