Thanks guys, right now I am looking for idea's I have to wait till warmer weather to do anything, as I still have snow an d freezing temps my reason on the filter is, all lines from well to holding tank are tucked up in the floor more or less insulated and then sealed off, thus, if I can prevent hav...

Thanks, but if the tank is going bad, I would rather replace the tank, as I guess if its going bad, it will just get worse, and need to be done
I just didn't know if it could be the well itself, over the tank
never heard of a well going bad, but again, don't know much about wells

thanks, I will have a water test done , I have a place near by that does them, had it tested about 6 yrs ago, and all was fine then and its just the past yr, I am finding these metal flakes coming out of my tub faucet , so I just thinking the pressusre tank maybe is old and rusting out, or?? the wel...

Ok I am looking for some help I bought an older mobile home a few yrs back to use as a hunting camp mobile home was set up on site in the late 60's, early 70's history I know of or think I do, is the well went dry a few tinmes, and every time they just went deeper, to, NOW I think its at about 800ft...

Ok looking for some help on where can I get some new noxxles for a Miller MOC-80 furnace I have I burn kero in it, and the nozzle I have now says .50 90 Degree (don't know how to find the little cicrcle on my ke board) what does that mean, and where can I buy some extra 's at and last, how often doe...

Ok I have an older mobile home, with a flat rolled metal type roof its 60ft long 12.5 ft wide, and was made in the early 60's I am starting to have some issues with the edges, were the roof meets the sides, starting to peel. I was wondering if anyone has had experience with roof coatings, and what o...

thanks again, I have 8 now, but will buy a couple more to be safe, better to have too many than not enough

Ok thanks, I have the Loctite surround one
any idea on how many tubes I will need, knowing I need to go heavy on it
don't wnat to run out mid way
thanks again

again, thanks But what brand of adhesive should I use/ and also my sections where the back wall meet and the side, well my sides have a curved edge, that the back just sits against at where ever there are no real flush fit on the two meeting I am not at the place, but when I get back there I will ta...

Thanks guys, But I cannot get a different type of surround due to Money I bought this one, had it shipped to me paid like 200 for it and if I want to return it I have to pay shipping costs and it will now cost me 217 bucks to return it more than I even paid for it, so I am sort of stuck I also neede...

Ok I need help I installed a new tub in a mobile home I have I ordered a new (never had one before) abs plastic 3 piece tub surround I installed one in a home before, but its nothing like this one the one i installed was about a 1/4 inch thick, plastic,and easy to handle this one is of a , look a li...

Ok I am new at plumbing, but I have a interest in trying I have an older modbile home, that I want to re do the bathroom A new tub, and surround(that I have done before, just in a house) But I never ran all new piping from the water supply ( waterheater to everything else as i see the old has some s...

Thanks The guys I have been using has been a service repair guy in the area for over 30+ yrs, is actually planning to retire soon or so he tells me, but he only works on one or two mobile homes, as few are in the area. I do not use the place a lot, but when I do, its mostly in winter month , as it i...

thanks, I reciently lost my job, so cost will be an issue for me, was hoping to get a ballpark idea what I am in for, best worse case deal
or about's of it>
thanks again,

Thanks guys I have a carbon monoxide , like a smoke alarm for it, that has a digital reading level IT states my place is safe I will I gues have to have someone look at it question?/ The HVAC guy I have been dealing with claims there is nothing wrong with it, but the smell keeps getting stronger SO,...