Hi Terri,

Let me look over your reply and I'll get right back with you. Had a network/server problem with computer and have been unable to receive and/or reply to anyone for two days.



Thanks,
Robert

Hi Terri, Do you have anyone with a volt meter that can do some simple tests for me and get some readings ? I'm sorry you have spent/wasted $300 and still not getting heat as you should . It could be a limit , an element coil or a breaker. Won't know without checking. Remember the 3 you called out s...

You're very welcome, happy to help.



Thanks,
Robert

You don't know him well enough then because there is nothing primadonna about him.


Take care and best wishes,
Robert

Hi,


The Coleman/Evcon database is showing Control Board # 331 - 01993 - 000 .


It is not listed in our store, but may still be in stock or may can order it in.


You will need to call Mark in the store @ 605-229-2627 on Monday to inquire about it further.


Thanks,
Robert

Hi,

One is a limit and the other is the fan switch which I gave ordering info on.




Thanks,
Robert

Brett Favre was a lot of things, primadonna was NOT one of them. He was the only thing they really had through many, many lean years.

Packers, been a fan since I was 5 years old. GO PACK !!


Take care and best wishes,
Robert

Hi, Your furnace does not have a sequencer. The fan switch controls the blower motor operation. Fan Switch # 7975 - 3281 can be seen and ordered from here by paging down : http://www.aberdeenhomerepair.com/store/product/2412/F110-20F--fan-switch-7975-3281 Could also be a shorted wire somewhere. Than...

Hi Barry,

The Sequencer is most common for that. It controls the blower and the elements.


Sequencer # 3115 - 3571 can be seen and ordered here if needed by paging down :

http://www.aberdeenhomerepair.com/store ... -sequencer



Thanks,
Robert

Hi Craig, You're very welcome, happy to help. Sorry I missed the fan switch question. It closes when the heat chamber reaches a predetermined temp to allow air to warm up before being distributed through home. Then, when burner shuts down, it keeps blowing to cool unit down to the off temp. Thanks, ...

Hi, You could completely replace it and may get a quieter one. The newer ones do run smoother and produce less noise if you wish to go that route. Miller is no more high end than Coleman or Intertherm, etc... . They have all been around a long time and are the top brands for MH's. They all have good...

Hi Zac,

It needs to be put back the way it was originally and then test the transformer as instructed .




Thanks,
Robert

Hi Craig, Roof Jack = Furnace chimney/roof cap on roof. Could be gas valve, low gas pressure or the orifice blocked. Most common is the orifice. Some you remove the gas valve and others you don't. The orifice/spud is between back of GV and the burner, so you can see if you need to remove the gas val...

Hi Zac,

I cannot help you unless you are willing to answer my questions. Test the transformer.



Thanks,
Robert