Hi am haveing a slight problem with spellchecker on site when posting it seems to freze up after about the third word. also is there any way that we can add to the spellchecker dictionary?

Hello and Welcome to the site. As far as i know you can go to your local hardware store and pickup dead bolt and door knobs for your home without any problems. you will probably get others with their input as well. One of the other things that you might want to purchase is the repair manual availabl...

Hi, have not used it on a roof but used it in my trucks as we get extreme cold up in northern Canada. while most trucks and sleepers were insulated i found after using this type of product that truck was as much as 40 degrees warmer and that i was turning the heat down in the truck.

Hi Del, Boy do those pics look familiar LOL cause my neighbours floor and underside look like that too. only difference is yours has black mold. guess you are going to learn how to do a sub floor and bathroom. Best of luck to you and keep pics coming. OH ya to keep mold from entering rest of home ta...

What a great video! We may have to link to it in our video section. Definitely shows one way of cleaning air ducts although the instructions would need to be tweaked a bit for mobile homes. Mark Good video on duct cleaning, also viewed some videos on mold. might not be a bad idea to see if you coul...

Hi everyone, Have been doing some research on synthetic oils and was talking to AMSOIL today and am very seriously thinking about becoming a dealer. Has anyone dealt with them before and what does everyone think about synthetic oils.

Hi JD, think Mark hit it on the head,sounds like you have wires on right side reversed. have had many problems like that on trailers i used to haul. some other driver has problem with lights, and decides to rewire trailers to his truck. gotta love them that don't know what they are doing. Later Rudy

No problem Have been called worse LOL

hi, i think you might have better luck in getting an answer if you post this question in the HAVC forum. it is a question i have been thinking about myself. will be interested to see the answers.

Just a PS from my better half, she says she would not go back to a top loader ever again now that she has this front loader. but she still wants the dryer replaced.

Hi, In the old days (dating myself LOL) when I was hauling homes to dealers and to sites the dealers would try to get job of blocking and skirting done as cheap as possible and vents were something that they could cut corners on.Also when most people would ask about venting they would have the add-a...

Hi plumducky, Yes that is the model we have. the only problem we have had was a shock problem and that was covered by warranty. It takes about 1hr &23min for cotton,permapress 1hr &14min, delicate is 55min, wool &silk 55min, hand wash 55min, whites 1hr &10 min. altho it seems like it...

Hello and Welcome to the site,
The problem that you have may be from the type of water you have in your area. I am not 100% sure but that is what i suspect. the coloring sounds like iron content,and having said that i would not worry to much about it as you have no leaks.

HI, I use my shop vac with a flexible hose and it seem to work fine. I also have a old washer drain line that I attach to the shop vac and it gives me an extra 4 ft of hose so i can if i have something to large to go through hose i can push it to next vent and pull it out .

Hi lefties, I use as a rule one square foot of open venting for every150 square foot of floor. If you use a vent that has a insect screen or louvers then add another 35% to your venting area. in your cases you should have approx 13 to 14 square feet of venting. you should have your vents on all side...