Hi,

You didn't list specifically which model number you have, but generally it's easiest to pull out the burner assembly to replace the thermocouple. A couple screws should remove the gas valve and a couple more should remove the burner.

Mark

Hi,

The blower running constantly probably has nothing to do with the thermostat. Most likely the problem is a stuck sequencer. Part number 901076 which you can see here: http://www.aberdeenhomerepair.com/store ... er-4-stage

Mark

Great pics. Thanks for sharing.

Mark

When you say 'reset' button, do you mean the limit switch with the button in the middle?

Mark

Thanks everyone for your responses. Here's the answers I was looking for: Bad: 1. Improperly heat taped. In fact, so much heat tape was used on the waterline that its now a fire hazzard. 2. Heat tape was not covered. It should be covered with no more than 1/2" thick fiberglass insulation. Shoul...

Once again, the first person to answer the questions correctly will win a mug and a $10 off coupon to our new store http://www.aberdeenhomerepair.com. Pictured below is a main waterline. Tell me 3 three main things wrong with this picture, and 2 things they did right. There's actually about 5 things...

It's time to announce a winner for our second coffee mug giveaway. Here are the 4 answers that I was looking for. 1. The blocks must have a base. For a single stack, that base should be at least a 16x16x4. A poured pad also works as a base. I also like railroad ties. And yes you could have a poured ...

Getting really really close, but I'm still holding out for a bit pickier answers.

Keep trying. Some of the answers are correct, but not all.

Mark

Yep, the coils could have easily been adjusted by lifting off the insulators and repositioning. If we would have known more about the issue, we would have talked them thru the fix over the phone so they wouldn't have needed to return the coil.

Mark

Never be afraid to try. Dinotoad didn't quite get all the answers correctly. Keep trying!

Mark

Hi, Every Friday I'll give you a chance to win a prize. Only rule is that you can't win more than 1 prize in 60 days. This week's winner will receive a coffee mug AND a $10 coupon good towards any purchase at our new online store http://www.aberdeenhomerepair.com/store/storefront.php. Just answer th...

We have a winner! That was fun. We'll do more contests. Keep checking back . . . .

Joedirt63, you have just won the mug. E-mail me your shipping address to [email protected] and I'll get a mug on the way to you.

Heating coils that are practically touching the limit switch will trigger problems. Coils should be kept an inch or more back.

Good job!

Mark

The pictures may be deceiving, but the wires do not touch. If they did, it would blow a breaker and not a limit switch. Keep trying!

Mark