LOL...it took me about 20 tries of readjusting my compressor so I didn't leave indents or anything.

I have mirror tint on my car...if you look in from the outside all you see is your own reflection, but from the inside looking out, everything is fine...

advanced auto parts

Alrighty then... Was underneath today and noticed how it's set-up. Raises more questions though. The return in my LR floor goes to the unit outside, then another hose comes out of the AC unit and ties into the existing ductwork... So, when I'm running my heat, how much heat get's lost in the outdoor...

There is a piece of 1/2 inch plywood under it already.

Fun fun fun... Having a horrible time with the washer and dryer (stackable) here and I have a question or 2. Shake, rattle and rollin... After about 2 hrs, we realized it's as level as it's going to get, still shakes the place. Tried 2 different sets of "anti-rattle pads" Still shakin... H...

Well, this is my first time owning and living in a mobile home so...it's a learning experience.lol



Thanks.

Sleepless night last night...need some help. I just put in my new washer and dryer and am concerned about weight issues. I'll start by giving a basic layout. It's a single wide with the master bedroom at the rear, a long hallway that runs along the outside wall up to the living room and kitchen. Off...

We have one but don't use it often, it frequently gives wrong readings. If your house is not air tight it can detect the mold in a pile of leaves outside your door.lol

We mostly use basic moisture meters. If the wall or ceiling is wet...it comes out.

Mold is a devil... This summer we did a job with 28 different kinds of mold. A 2 story house we had to gut from floor to ceiling, with full hazmat suits and respirators. Even with all the decontamination we would still end up with the occasional sore on our face or folds in our skin... There is neve...

I just bought the place...I have no idea if it came factory or added later.

The AC unit is the standalone setup outside...

OK, I have a basic kero furnace with the return on the front of the unit in my MH. I have a total of 9 4x8 registers throughout. I also have a huge vent in my living room floor, prolly 15x20. I have central air that was added a few years back. I personally thought, from the size, it was a return. Th...

We use Chemical sponges at place for cleaning flat walls or ceilings...they work decent on soot and household dust but not so good for fingerprints or pen.

We used Glidden Gripper for our place and everything came out great...40 years of cigg smoking all covered up.

We deal with alot of things at my job, and sewage is one of them. It HAS to come out. Better while it is frozen. Warm up some bleach (to stop it from freezing) and apply it EVERYWHERE the septic has touched. If you have a way to get sporicide or microbahn, even better...

Wow....so much has been going on lately. The name of the MH changed form the money pit to Murphy's Law.lol I'll have pics soon, such a huge change!!! My question is while I was doing a thorough cleaning job on the floors today, getting ready for carpet tomorrow, I realized the rear corners of the MH...