Search found 6413 matches

by Robert
Sat Feb 26, 2011 12:07 am
Forum: Coleman Service & Repair
Topic: Coleman EB Series Furnace / Filter Problems
Replies: 1
Views: 1521

Re: Coleman EB Series Furnace / Filter Problems

Hi,

Do you have heat only or heat and a/c ?


IF you have a/c, does it do this in cool mode also ?



Thanks,
robert
by Robert
Fri Feb 25, 2011 11:59 pm
Forum: Coleman Service & Repair
Topic: Coleman EB15B continues to trip breaker
Replies: 3
Views: 1761

Re: Coleman EB15B continues to trip breaker

Hi,


That may or may not be the cause, so watch it closely.



Thanks,
Robert
by Robert
Wed Feb 23, 2011 8:30 pm
Forum: Coleman Service & Repair
Topic: Deluxe Blend Air II Damper Motor
Replies: 16
Views: 6178

Re: Deluxe Blend Air II Damper Motor

Hi David,


Thanks for update, glad it is operational again.




Take care and best wishes,
Robert
by Robert
Wed Feb 23, 2011 8:27 pm
Forum: Coleman Service & Repair
Topic: Catching on fire
Replies: 1
Views: 1385

Re: Catching on fire

Hi Jodi,



No recalls on that furnace. You will definitely need an hvac tech to thoroughly inspect and properly diagnose.


Find one who is reputable, but beware of last one. It should not ever cost $500 to diagnose a furnace problem.


Thanks,
Robert
by Robert
Tue Feb 22, 2011 11:05 pm
Forum: All Other HVAC Questions
Topic: Furnace way to loud. Moving it back 3 feet.
Replies: 8
Views: 6858

Re: Furnace way to loud. Moving it back 3 feet.

Hi,


You're very welcome, happy to help.



Take care and best wishes,
Robert
by Robert
Tue Feb 22, 2011 11:03 pm
Forum: Coleman Service & Repair
Topic: 7995-316 making ticking noise
Replies: 3
Views: 1730

Re: 7995-316 making ticking noise

Hi,


You're very welcome , happy to help.


P.S. A humble attitude is the best attitude of all !!!




Thanks,
Robert
by Robert
Mon Feb 21, 2011 3:47 pm
Forum: Coleman Service & Repair
Topic: model DGAT075BDF Won't stay lit
Replies: 1
Views: 1340

Re: model DGAT075BDF Won't stay lit

Hi William,

That is often due to a dirty or misaligned remote flame sensor.

You can carefully inspect ceramic shroud for cracks and clean sensor rod with steel wool.


Do not touch with bare hands. Turn power off first.




Thanks,
Robert
by Robert
Mon Feb 21, 2011 3:25 pm
Forum: Coleman Service & Repair
Topic: Blower
Replies: 13
Views: 4222

Re: Blower

Hi Don, IF you purchased the sequencer from us, it may be covered under the warranty IF the sequencer itself is bad. Getting 24vac across H1 and H2 is what energizes M1/M2 and M3/M4 and closes them. You will read 240vac before they close and 0vac after they close. You stated M1/M2 is still reading 2...
by Robert
Sun Feb 20, 2011 11:04 pm
Forum: Nordyne Service & Repair
Topic: Intertherm ID
Replies: 1
Views: 1713

Re: Intertherm ID

Hi Gord,

Data sticker should be on lower electrical component panel cover. WITH a call for heat from t-stat, you should have 240vac across each element coil after about 30/45 seconds.


Test end terminals on white ceramic insulators.


Sequencer is most common problem.


Thanks,
Robert
by Robert
Sun Feb 20, 2011 10:59 pm
Forum: Coleman Service & Repair
Topic: Need Allergy Filters for Colman Evcon Presidential Furnace
Replies: 1
Views: 1220

Re: Need Allergy Filters for Colman Evcon Presidential Furna

Hi,


Call Mark @ 605-229-2627 to see if he has those or can get them. Probably be quicker to contact a local hvac contractor.



Thanks,
Robert
by Robert
Sun Feb 20, 2011 10:57 pm
Forum: Coleman Service & Repair
Topic: Pilot Assembly & Gas Valve for Coleman Model 8610D
Replies: 1
Views: 1511

Re: Pilot Assembly & Gas Valve for Coleman Model 8610D

Hi,

Forwarded your email to Mark. Doubt he can help, but figured I'd at least try.



Thanks,
Robert
by Robert
Sun Feb 20, 2011 10:52 pm
Forum: Coleman Service & Repair
Topic: Blower
Replies: 13
Views: 4222

Re: Blower

Hi Don,

Sequencer is bad. M1/M2 should read 0vac.

M1/M2 controls one element coil and the blower motor in auto.



Do you need ordering info for the sequencer ?


Thanks,
Robert
by Robert
Sun Feb 20, 2011 10:48 pm
Forum: All Other HVAC Questions
Topic: Furnace way to loud. Moving it back 3 feet.
Replies: 8
Views: 6858

Re: Furnace way to loud. Moving it back 3 feet.

Hi,


Don't remember the question, but it appeared to be concerning return air. Do not get that confused with combustion air to the burner.


Thanks,
Robert
by Robert
Sun Feb 20, 2011 10:40 pm
Forum: Nordyne Service & Repair
Topic: A-coil help needed
Replies: 3
Views: 2022

Re: A-coil help needed

Hi,

When first installed, it is matched with outdoor condensing unit.

Later on, it may be replaced by same or a compatible coil.


Usually the a-coil is a half ton larger than the condensing unit for a heat pump.



What is your furnace model number ?



Thanks,
Robert
by Robert
Sun Feb 20, 2011 3:01 am
Forum: Coleman Service & Repair
Topic: Coleman EB15 heater not working
Replies: 4
Views: 1966

Re: Coleman EB15 heater not working

Hi Dave,


You're very welcome, happy to help. Glad it is taken care of.



Thanks,
Robert