Search found 14 matches

by dzimmer
Mon Jul 22, 2013 1:02 pm
Forum: Coleman Service & Repair
Topic: Control Board Fuse
Replies: 3
Views: 7170

Re: Control Board Fuse

Fuse has been on for almost 2 weeks and stilll good. I did not find anything with low voltage wires when I looked, I am pretty sure it will be back to haunt me

update 10/17 still working w/ no issues?????
by dzimmer
Fri Jul 12, 2013 1:45 pm
Forum: Coleman Service & Repair
Topic: Control Board Fuse
Replies: 3
Views: 7170

Re: Control Board Fuse

Thanks, I will look at low voltage wires. I have never changed fuses so I figured 5 amp was correct, I will put 3 amp in.
by dzimmer
Thu Jul 11, 2013 7:27 am
Forum: Coleman Service & Repair
Topic: Control Board Fuse
Replies: 3
Views: 7170

Control Board Fuse

I have a Coleman GDAT090088 with an AC unit. When I turned on the AC this year it would not run. I found a blown 5 amp fuse on the board. Did not have a 5 amp but I had a 3 amp. Put the 3 amp in and it ran for 3-4 days and blew again. OK so I went and got some 5 amp fuses and put a 5 amp in, it ran ...
by dzimmer
Mon Sep 26, 2011 1:22 pm
Forum: Coleman Service & Repair
Topic: Make: Coleman / Model: DGAT070BDD
Replies: 3
Views: 4567

Re: Make: Coleman / Model: DGAT070BDD

Glad it worked!
by dzimmer
Fri Sep 16, 2011 10:56 am
Forum: Coleman Service & Repair
Topic: Make: Coleman / Model: DGAT070BDD
Replies: 3
Views: 4567

Re: Make: Coleman / Model: DGAT070BDD

I have seen this on mine at times and I think it is the blower for the combustion air that is the problem. Look to thr right of the BIG blower motor for a smaller motor, in that housing is the centrifical switch. tap on it and see if it frees it up, I had to take mine apart once and clean it but mos...
by dzimmer
Tue Mar 29, 2011 9:24 am
Forum: Coleman Service & Repair
Topic: fan? on constantly and pretty loud.
Replies: 1
Views: 1940

Re: fan? on constantly and pretty loud.

Maybe you have a blend air system that is not working properly, it is normal that they run quite a bit. Check it out here http://www.mobilehomerepair.com/ArticleBlendAir.html
by dzimmer
Tue Feb 22, 2011 9:16 am
Forum: Coleman Service & Repair
Topic: Deluxe Blend Air II Damper Motor
Replies: 16
Views: 9066

Re: Deluxe Blend Air II Damper Motor

So you have 24vac at the lower board connection terminals for the damper motor ? However, your damper motor is not working ? Copied from above post: NO this is not true. I have 24vac feeding lower board BUT .........DO NOT have 24vac at the damper motor terminals. And this is a NEW lower board. Sor...
by dzimmer
Fri Feb 18, 2011 8:22 pm
Forum: Coleman Service & Repair
Topic: Deluxe Blend Air II Damper Motor
Replies: 16
Views: 9066

Re: Deluxe Blend Air II Damper Motor

Robert,
I did call mark and had me try new upper board also and that fixed the problem. So looks like originally I had a bad lower board, then the new lower board was bad also, then upper board was bad also. Anyways working now ☺☺☺

Thanks again

David
by dzimmer
Sat Feb 12, 2011 5:53 pm
Forum: Coleman Service & Repair
Topic: Deluxe Blend Air II Damper Motor
Replies: 16
Views: 9066

Re: Deluxe Blend Air II Damper Motor

Robert, I almost don't want to say this BUT the new board did not fix it yet either. Got board today and installed but this is the sequence now. If I start the blower with both switches in auto the damper opens and get yellow light. Sounds good but still getting a blinking red fail light and an alar...
by dzimmer
Mon Feb 07, 2011 10:59 am
Forum: Coleman Service & Repair
Topic: Deluxe Blend Air II Damper Motor
Replies: 16
Views: 9066

Re: Deluxe Blend Air II Damper Motor

Robert,
Called Mark and new board should be on its way. Will post back when I get board and let you know what happens.

Thanks Again
David
by dzimmer
Sun Feb 06, 2011 3:31 pm
Forum: Coleman Service & Repair
Topic: Deluxe Blend Air II Damper Motor
Replies: 16
Views: 9066

Re: Deluxe Blend Air II Damper Motor

Thanks Robert, I will call Moday morning

David
by dzimmer
Sat Feb 05, 2011 3:59 pm
Forum: Coleman Service & Repair
Topic: Deluxe Blend Air II Damper Motor
Replies: 16
Views: 9066

Re: Deluxe Blend Air II Damper Motor

Hi David, So you have 24vac at the lower board connection terminals for the damper motor ? However, your damper motor is not working ? IF that is the case, then the damper motor is bad most likely. Thanks, Robert NO this is not true. I have 24vac feeding lower board BUT .........DO NOT have 24vac a...
by dzimmer
Fri Feb 04, 2011 8:23 am
Forum: Coleman Service & Repair
Topic: Deluxe Blend Air II Damper Motor
Replies: 16
Views: 9066

Re: Deluxe Blend Air II Damper Motor

I did just that and I am not getting 24 vac at connection terminals for damper motor

David

Sorry Robert I miss read the response :oops: I did check for 24 vac to the board as instructed in step 1 and I do have 24 vac to the red and yellow wires

Sorry David
by dzimmer
Thu Feb 03, 2011 8:21 pm
Forum: Coleman Service & Repair
Topic: Deluxe Blend Air II Damper Motor
Replies: 16
Views: 9066

Deluxe Blend Air II Damper Motor

I have been working on this for a while now. I used the troublshooting guide and found I did not have 36 volts out of lower control board so I sent it in for repair. I have talked to the repair guy a few times and he said my old board would work and then quit and he tried a new relay but that did no...