Search found 9 matches
- Sat May 06, 2017 4:39 pm
- Forum: Mobile Home Repair
- Topic: range hood replacement
- Replies: 5
- Views: 7707
Re: range hood replacement
Okay. Good points. Thank you.
- Sat May 06, 2017 9:30 am
- Forum: Mobile Home Repair
- Topic: range hood replacement
- Replies: 5
- Views: 7707
Re: range hood replacement
The wall seems simpler by far. They could have put the range where the fridge is (outside wall) for sure. (Like the dryer, but that's another story.) So the range exhaust goes through the center which between the peak and side wall. Rather far. So I just wasn't sure if the venting needs replacing or...
- Fri May 05, 2017 2:25 pm
- Forum: Mobile Home Repair
- Topic: range hood replacement
- Replies: 5
- Views: 7707
range hood replacement
Our range currently has a microwave range hood. While it is vented through the roof, we still get strong smells down the hall from cooking. It looks as though they used the springy-type ducting, at least from hood, through cabinet through ceiling. I'm debating on removing the microwave entirely as i...
- Sun Mar 07, 2010 4:13 pm
- Forum: Mobile Home Repair
- Topic: Putting a door in
- Replies: 3
- Views: 1537
Re: Putting a door in
Not sure I'm going to mess with it either. Our studs are 2x4. But now I worry about extra load on the floor due to the displacement.
I'll chuck it.
I'll chuck it.
- Sat Mar 06, 2010 10:51 am
- Forum: Mobile Home Repair
- Topic: Putting a door in
- Replies: 3
- Views: 1537
Putting a door in
When we walk in our front door, there is a coat closet straight ahead. If we knocked out the back wall in the back closet it would go straight into the kitchen. It would be so handy to bring in groceries. Currently we have to walk through the FR or LR to get to the kitchen. On each side of this clos...
- Wed Jun 11, 2008 11:17 am
- Forum: Mobile Home Repair
- Topic: Filling holes in hardiboard siding
- Replies: 1
- Views: 1801
Filling holes in hardiboard siding
What do you use to fill holes in hardiboard siding?
We have a few holes from screws that need filling.
We have a few holes from screws that need filling.
- Sun Feb 17, 2008 11:26 am
- Forum: Mobile Home Repair
- Topic: Constant hairline cracks
- Replies: 8
- Views: 3944
Thanks everyone. I think we'll check if it's still floating and have them jack it so it doesn't flex. Then we'll get some of that good flexible stuff Mark mentioned. The hardi-board shouldn't be a problem. It came straight from the factory. As for drywall, Oldfart, it really hasn't been a problem wi...
- Fri Feb 15, 2008 10:29 pm
- Forum: Mobile Home Repair
- Topic: Constant hairline cracks
- Replies: 8
- Views: 3944
RE: Constant hairline cracks
We have a 2002 32 x 78 foot home w/hardi-board siding and all tape and texture walls 2 x 6 w/2 x 8 floors. We have "jack stands" on bricks w/a dirt foundation, and we live in Arizona. I highly doubt it's wind. It's not that windy very often. So it's very dry and it's very dry underneath th...
- Fri Feb 15, 2008 8:09 pm
- Forum: Mobile Home Repair
- Topic: Constant hairline cracks
- Replies: 8
- Views: 3944
Constant hairline cracks
UGH...now I know this means that the home is moving! We had a relevel done the following year and a half after our move in. We knew it wasn't level when they set the home originally, because everything was off. So the initial home set up company came back within 6 months and releveled it....so they ...