Thank you!

Hi, we have a Nordyne E2EH-105HA and it will not cycle on and off as it should when the thermostat. We replaced the wire harness last winter and that didn't solve the problem. When I tap or move the wire harness connection to the relay circuit board it turns on, but it does not turn off. I want to r...

That's a great idea Aaron thank you!

Thank you!

Thank you for the replies. JD I think you have the best answers for our situation. Our home is a 1996 or 1997 double wide with a brick foundation.

It's just been a colder than normal winter for us I know! And coming here form Tucson, AZ I'm just not acclimated yet!!

Good luck to you too Minxzz

Our dryer vents through a hole in the floor behind the dryer and down into the crawlspace. The previous owners did not have a lint collection system or route it to the outside of the house. They just had the hose hanging down in the crawlspace. The crawlspace has quite a bit of lint on the ground an...

Our dryer vents through the floor under the dryer and into the crawlspace. The previous owners did not have a lint collection system or route it to the outside of the house. They just had the hose hanging down in the crawlspace. The crawlspace has quite a bit of lint on the ground and walls and it i...

Hi Mary, The sequencer controls the blower in heat mode, but could be a bad harness, loose wire or bad connection somewhere. Thanks, Robert What is the sequencer and where is it located? How would I be able to test it to make sure it is the part that isn't working right? What harness are you referr...

Hi, our home is all electric and the utility bill is fairly high and I'd like to do what I can to keep the heat or A/C in the house where it belongs! The underbelly insulation seems fine, we have double pane windows and I have put weather stripping around the doors. I don't know how good the insulat...

Hi, We have a Nordyne E2EH-105HA in the home we just bought in Oct. the heater (blower) won't cycle on and off as it should. So I took a look and tried wiggling and adjusting the wire harness and as I did it clicked on. I thought maybe the wire harness was old or had a short so I replaced it. The pr...