Robert wrote:Hi, <snip>
zip ties, sheet metal screws and foil backed tape to connect and seal joints and seams.
Support it every 4 to 6 feet with web strapping.
Thanks,
Robert
Search found 6 matches
- Fri Jan 01, 2010 1:16 am
- Forum: All Other HVAC Questions
- Topic: Fan blowing, but no forced air out the vents
- Replies: 4
- Views: 3931
Re: Fan blowing, but no forced air out the vents
I found Robert had already answered some of my questions in this post
- Fri Jan 01, 2010 12:57 am
- Forum: All Other HVAC Questions
- Topic: Fan blowing, but no forced air out the vents
- Replies: 4
- Views: 3931
Fan blowing, but no forced air out the vents
Problem - no air coming out of vents. We have a 3 wide 1996 MH. First it was the kitchen vent that stopped, then it was the Living room. Now we have no forced air coming out of any of our vents. Semi Solved. During our unsually cold time, my husband opened up under our house for our cats to take ref...
- Thu Dec 31, 2009 11:14 pm
- Forum: All Other HVAC Questions
- Topic: Forced air heat distribution changed to uneven
- Replies: 10
- Views: 6695
Re: Forced air heat distribution changed to uneven
Good luck with finding the solution. I will be watching this for answers
- Sat Oct 17, 2009 2:19 am
- Forum: Coleman Service & Repair
- Topic: Solved, I think:PColeman eb20b tstat clicks, no fan no heat
- Replies: 3
- Views: 1543
Re: coleman eb20b tstat clicks, no fan no heat
found my answer. After doing some research on this forums. I have learned 2 things. Even though I replaced my sequencer in 2007 it could be that again. One man wrote in saying he goes thru a sequencer a year on his coleman. I also learned that if I dig enough on here I can find where Robert gave the...
- Thu Oct 15, 2009 2:58 pm
- Forum: Coleman Service & Repair
- Topic: Solved, I think:PColeman eb20b tstat clicks, no fan no heat
- Replies: 3
- Views: 1543
Re: coleman eb20b tstat clicks, no fan no heat
more information,
the transformer has 220 on one side and 24v on the other,
When I turn on the bottom breaker, inside of the unit, no hum, when I turn on the top breaker, a slight hum.
the transformer has 220 on one side and 24v on the other,
When I turn on the bottom breaker, inside of the unit, no hum, when I turn on the top breaker, a slight hum.
- Thu Oct 15, 2009 12:02 pm
- Forum: Coleman Service & Repair
- Topic: Solved, I think:PColeman eb20b tstat clicks, no fan no heat
- Replies: 3
- Views: 1543
Solved, I think:PColeman eb20b tstat clicks, no fan no heat
I can turn the fan on continuous from the t-stat and fan turns on and blows for as long as I want it to. I set the fan to auto, heat, turn up the thermostat to call for heat, it clicks, then nothing, no heat, no fan nothing. Thermostat has 24 volt at the unit. The furnace has 220 to the unit. We rep...