nevermind I found it.

7945-3281/A Lower Limit Switch (0-140, C-110) 7956 All 7970-3281/A Lower Limit Switch (0-145, C-115) 7966, 7979, 7975 All 7995-3281/A Lower Limit Switch (0-150, C-120) 7995 All Which one do I need? I see the numbers 970-328 on the switch itself so was Assuming the second one would be it. But I am ju...

Here are a few pics of what i have....I guess there is mounting hardware and other thing I need to buy too. Sorry, this is my first time doing anyhting like this. I jsut want to make sure i do it right so nothing leaks and it drains right. http://i65.photobucket.com/albums/h228/civic_crazy/th_DSCF34...

I am wanting to install bigger and better gutter on my mobile home. I have a 1991 14X70 Fleetwood, with a metal roof and the little gutters on it now. I was wondering how hard it would be to install new gutters? Any tips or anything special i should be doing while i am doing this?

I have a 1991 fleetwood mobile home. It has a Coleman Presidential III Model # 7970A856 (70,000 BTU) furnace in it now. I am wanting to replace this furnace. What would be a good furnace to replace it with. Please let me know

Yea, I see two chair terminals. But, 8 of the 9 terminals are still being used.

How will I wire it if the new switch only has 6 spade terminals and my switch has 9 spade terminals?

Here is what it looks like.


By civiccrazy

By civiccrazy


By civiccrazy

Coleman Model # 7970A856 Serial # 049070950 Furnace. I am looking for a system switch for this furnace. The one that switches it from cool to heat. The hvac tech i had come and look at the furnace said that he could not get one. So, here i am looking for one. It has 9 prongs. I can take a picture if...

the motor never stopped just squeaked for a little bit. I will keep a close eye on it. If I starts squeaking again i will replace the motor

I traced the wire from the motor to the control box underneath. It had 120vac power. When it cuts off it is not hot. I had someone come out and look at it today. Two switches were bad....the one that switches it from AC to Heat, and the one on the little box below that which i think is the power swi...

I'm sorry. I am not getting what you are saying about tracing the motor lead back to closest connection? I am also trying to figure out whats wrong on the ask me help desk. Someone else said: It sounds like all along that the problem was in the motor, it has an internal heat protector and when it wo...

Tonight the fan motor started sqeaking really loud. Is there anything I can do to stop that or do i have to buy a new fan motor.

Yes I did, Both wires to ground read 120vac when running. When off, the bottom wire to ground read 120vac and the top wire read 0vac.

If Thats not whats wrong with it what else could it be?

The furnace is stilll doing the same thing, could it be the fan switch?? If so, how would i go about ordering one?