mobilehomerepair.com

Posted: **Thu Jul 26, 2012 8:20 am**

Hello.

I've replaced half of the 3/8 copper with pex, now I'm doing the other half of the MH which has the HW tank.

Do I need to drain and/or release the pressure on the tank?

Posted: **Thu Jul 26, 2012 4:58 pm**

You should be OK just relieving the pressure, but you may want to turn it off in case you end up draining it. It may siphon if the end you are working on is lower than the tank.

Greg

Posted: **Thu Jul 26, 2012 5:49 pm**

Great.

Thanks Greg!

Posted: **Thu Jul 26, 2012 7:22 pm**

Don't forget to add shutoffs!!!!

Greg

mobilehomerepair.com

Changing the pipes on a HW tank.

Changing the pipes on a HW tank.

Re: Changing the pipes on a HW tank.

Re: Changing the pipes on a HW tank.

Re: Changing the pipes on a HW tank.