conversion from natural gas to LP MGHA-056ABFC-01
I am converting my Nordyne furnace to LP gas. I did the conversions and lit the pilot. The burner did not come on at first and then I turned on the fan switch just under the blower. The burner lit. It took the heater a while to come on but it only stayed on for a couple of minutes. It was coming on and off every 2 minutes so I shut it off. What needs to be done? I also think the pilot and burner are way too high. How do I adjust that?
The burner would not light nor the fan would not come up normally?
You can't fail if you don't try!
-
- Similar Topics
- Replies
- Views
- Last post
-
-
I am thinking of switching to a gas water heater
by deryk the gypsy » Sat Jul 22, 2017 7:16 am » in Mobile Home Repair - 2 Replies
- 36559 Views
-
Last post by Greg
Sat Jul 22, 2017 12:26 pm
-
-
-
Need to remove a stripped Allen wrench-type plug from the OUT PRESS port on top of gas valve
by justplumducky » Fri Aug 25, 2017 8:21 am » in Nordyne Service & Repair - 1 Replies
- 46530 Views
-
Last post by Maxwell.lipphardt
Mon Feb 04, 2019 6:29 am
-
-
-
Intertherm standing pilot LPG burner 77 BTU IN gas valve mounting plate gets hot ( not warm).
by justplumducky » Sat Sep 09, 2017 3:34 am » in Nordyne Service & Repair - 1 Replies
- 70524 Views
-
Last post by Maxwell.lipphardt
Thu Nov 22, 2018 10:15 am
-
-
- 0 Replies
- 39641 Views
-
Last post by David DeBord
Sun Oct 22, 2017 7:13 am