igniter for Nordyne furnace
Posted: Mon Dec 06, 2010 11:59 am
Looking to replace an igniter for Nordyne gas (propane) furnace M# M1MB 070A BW / SN M1A050801489. I have found three igniters on this site that look like the one I have. The difference between them seems to be the lead wire connectors. # 902694 /# 903110A /# 902611A. I have located a parts distributor in my area they are currently out of stock on two of the three igniters. the one they have is # 903110A. My question is will any of these work and if not how do I find the correct part for my furnace?
Igniter has physical damage to the semi conductor spirol element (done accidentally when dropped).
The origination of the problem as it turns out is the induction fan propeller came off the motor shaft (red LED two flashes). Draft to vacume switch would not close the circuit. Now we have a solid red LED no flash.
Igniter has physical damage to the semi conductor spirol element (done accidentally when dropped).
The origination of the problem as it turns out is the induction fan propeller came off the motor shaft (red LED two flashes). Draft to vacume switch would not close the circuit. Now we have a solid red LED no flash.