Page 1 of 1
Coleman Evcon DGAT090BDD
Posted: Sun Oct 03, 2010 11:19 am
by andyr78
Hello,
Tried using furnace first time today. It is not working. The Diag light blinks 6 times. I tried searching but could not find anyone who had 6 blinks. I can get the fan to turn on, but not the heat.
Thank you for any assistance.
Re: Coleman Evcon DGAT090BDD
Posted: Sun Oct 03, 2010 8:06 pm
by andyr78
Might end up having to call someone out. Now it's only blinking 3 times. Which if I have done my research correctly is the Centrifugal switch.
Re: Coleman Evcon DGAT090BDD
Posted: Mon Oct 04, 2010 12:20 am
by Robert
The booster motor with cent. switch would come on first with a call for heat. It would have to reach a certain speed or nothing would work.
IF the cent. switch is bad, the booster motor will have to be replaced.
Can give ordering info if needed.
Thanks,
Robert
Re: Coleman Evcon DGAT090BDD
Posted: Wed Oct 06, 2010 7:01 pm
by andyr78
That would be great.
I am going to need to get this repaired before it gets too cold. Thank you for the reply.
Re: Coleman Evcon DGAT090BDD
Posted: Wed Oct 06, 2010 11:54 pm
by Robert
Hi,
Booster Motor w/Cent. Switch # 7990-317P/A can be seen and ordered here by paging down:
http://www.aberdeenhomerepair.com/store ... ster-motor
Thanks,
Robert
Re: Coleman Evcon DGAT090BDD
Posted: Thu Oct 07, 2010 7:39 pm
by andyr78
Thank you for the information.
Re: Coleman Evcon DGAT090BDD
Posted: Thu Oct 07, 2010 9:43 pm
by Robert
You're very welcome, happy to help.
Thanks,
Robert