Page 1 of 1

Nordyne Model: E2EB-017HA Heat

Posted: Mon Nov 30, 2009 6:48 pm
by Keith W
I have had some problems in the past with the unit on occasion not shutting off in the heat mode.
I came home work last week and it was 101 Deg in the house. I turned off the thermostat but the unit keeps running. I removed the cover on the bottom of the unit and started checking out the wiring. When i tapped one of the sequencers there was a little arc sound and the unit shut off. It worked fine fore a couple of days and started doing the same thing. A small tap with a non conductive device will usually make it shut off, now however the only way to shut it off is to shut off the breaker. I am not a heat and air guy but i do have a techenical background (electric motor manufacturing test lab)

What do i need to replace to get the unit to shut off. I gets cold at night without any heat.

Thanks

Keith W :|

Re: Nordyne Model: E2EB-017HA Heat

Posted: Wed Dec 02, 2009 3:51 pm
by Robert
Hi Keith,

Sequencer # 01 - 0843 can be seen and ordered through PayPal from right side here :

http://www.mobilehomerepair.com/NordyneElec.html



That is most common for what you stated.



Thanks,
Robert

Re: Nordyne Model: E2EB-017HA Heat

Posted: Wed Dec 02, 2009 10:51 pm
by Keith W
Thanks Robert,

The unit is working again for now, I will get one ordered to replace it when it does it again.

Thanks again

Re: Nordyne Model: E2EB-017HA Heat

Posted: Thu Dec 03, 2009 3:38 am
by Robert
Hi Keith,

You're very welcome, happy to help.



Thanks,
Robert