furnace blower working but no heat coming out
I have a Intertherm Mac 2241A electric furnace. One day I noticed smell like burning wire and the outside of the furnace was hot to the touch. I turned off the breaker and waited for it to cool down. I waited a couple of days and turned the unit back on and it seemed to work fine. The next day when the unit kicked on it was only blowing out cold air. What do you think the problem is? Please help!!!
Hi,
Could be a bad sequencer, contactor or wire. Would need to open control area and look it over and test the components to know for sure.
Thanks,
Robert
Could be a bad sequencer, contactor or wire. Would need to open control area and look it over and test the components to know for sure.
Thanks,
Robert
Some people are Humbly Grateful, while some are Grumbly Hateful.................... Which one are you ?
Hi,
It would only be either a sequencer or a contactor, not both. I can assist in seeing if parts are available for ordering and can give basic info such as already given.
That will help to lead/point to possible problem(s).
For further help in actually testing components, I charge a $20 troubleshooting fee for 1 hour of one on one emails.
If interested , go here :
http://www.mobilehomerepair.com/Order4b.html
Any other basic questions I can answer, will do what I can.
Thanks,
Robert
It would only be either a sequencer or a contactor, not both. I can assist in seeing if parts are available for ordering and can give basic info such as already given.
That will help to lead/point to possible problem(s).
For further help in actually testing components, I charge a $20 troubleshooting fee for 1 hour of one on one emails.
If interested , go here :
http://www.mobilehomerepair.com/Order4b.html
Any other basic questions I can answer, will do what I can.
Thanks,
Robert
Some people are Humbly Grateful, while some are Grumbly Hateful.................... Which one are you ?
-
- Similar Topics
- Replies
- Views
- Last post
-
-
Intertherm/Nordyne feh-015ha furnace issues blower not working, unit will only turn off at breaker box
by onmypath78 » Sat Mar 16, 2019 12:11 pm » in Nordyne Service & Repair - 0 Replies
- 150151 Views
-
Last post by onmypath78
Sat Mar 16, 2019 12:11 pm
-
-
-
Heat strips are on, but not the fan.
by Forestbrook » Sat Dec 08, 2018 6:09 pm » in Coleman Service & Repair - 0 Replies
- 36731 Views
-
Last post by Forestbrook
Sat Dec 08, 2018 6:09 pm
-
-
-
New Deck and Porch coming (photos included)
by vilmel2vilmel2 » Mon Jul 17, 2017 5:58 pm » in Mobile Home Repair - 4 Replies
- 39855 Views
-
Last post by vilmel2vilmel2
Wed Aug 02, 2017 10:29 am
-
-
- 3 Replies
- 12211 Views
-
Last post by Greg
Sun Aug 20, 2017 12:25 pm
-
-
Edge of underfloor coming up under linoleum
by MizFurball2u » Fri Jun 01, 2018 12:48 am » in Mobile Home Repair - 5 Replies
- 35819 Views
-
Last post by MizFurball2u
Sun Jun 03, 2018 11:04 pm
-