I have a wesco model 2100 serial 640823
Posted: Thu Feb 26, 2009 12:25 am
I was called to my dad's house to look at his electric furnace.
I found only one sequencer of the three functioning.
They are all thermo disk sequencers and the part numbers are all obsolete. TOP 14SH22 MIDDLE 12SH22 BOTTOM 12SH22
I want to replace all three but they aren't functioning to measure of and on times.
Is there a standard three that I can put together that will put me back in business or should I look for an all in one relay that has has three sequential start times or how should I go about repairing this unit. If I had a book that I could look up these things up life would be great. I am new to this and I am open to any suggestions. Thank you
I found only one sequencer of the three functioning.
They are all thermo disk sequencers and the part numbers are all obsolete. TOP 14SH22 MIDDLE 12SH22 BOTTOM 12SH22
I want to replace all three but they aren't functioning to measure of and on times.
Is there a standard three that I can put together that will put me back in business or should I look for an all in one relay that has has three sequential start times or how should I go about repairing this unit. If I had a book that I could look up these things up life would be great. I am new to this and I am open to any suggestions. Thank you