Furnace conversion
I am converting a natural gas Miller MGC-80 to lp. What are the parts I need for this and where can I find them? Also any help on how to do the change over would be great. On the furnace it says lp conversion orifice is included but that has been long gone as I am not the original owner and there is no manual.
Hi,
Welcome to the site.
I am going to move your post to the HVAC forums. Please read the posting tips there to make sure you have included as much info as the tech might need.
Merry Christmas,
Yanita
Welcome to the site.
I am going to move your post to the HVAC forums. Please read the posting tips there to make sure you have included as much info as the tech might need.
Merry Christmas,
Yanita
The difference between success and failure is who gives up first!
Hi,
LP Burner Orifice # 661041 @ $9.00 + $4.50 shipping.
Change orifice, convert gas valve by removing conversion stem, invert and replace. Will change from showing NG or NAT GAS to LP.
Have hvac tech or gas company change gas pressure after installing LP tank and regulator.
Inspect cycle and adjust burner flame if needed.
Thanks,
Robert
LP Burner Orifice # 661041 @ $9.00 + $4.50 shipping.
Change orifice, convert gas valve by removing conversion stem, invert and replace. Will change from showing NG or NAT GAS to LP.
Have hvac tech or gas company change gas pressure after installing LP tank and regulator.
Inspect cycle and adjust burner flame if needed.
Thanks,
Robert
Some people are Humbly Grateful, while some are Grumbly Hateful.................... Which one are you ?
-
- Similar Topics
- Replies
- Views
- Last post
-
-
DGAT Series furnace air-conditioning issue
by minnie1967 » Thu Jul 13, 2017 9:48 am » in Coleman Service & Repair - 0 Replies
- 60824 Views
-
Last post by minnie1967
Thu Jul 13, 2017 9:48 am
-
-
-
Acceptable HEAT RISE number for this 20-yr. old furnace.
by justplumducky » Tue Aug 29, 2017 5:33 pm » in Nordyne Service & Repair - 0 Replies
- 43529 Views
-
Last post by justplumducky
Tue Aug 29, 2017 5:33 pm
-
-
-
Can't get the furnace cover to go on
by nestsman » Sat Sep 30, 2017 4:53 pm » in Nordyne Service & Repair - 2 Replies
- 47444 Views
-
Last post by tkrueger
Sat May 05, 2018 9:12 pm
-
-
- 0 Replies
- 24579 Views
-
Last post by jrpells2017
Wed Nov 08, 2017 8:58 am
-
- 0 Replies
- 29817 Views
-
Last post by Carl Wofford
Sat Jan 20, 2018 6:55 pm