Page 1 of 1
Window Caulk
Posted: Wed Mar 07, 2007 7:38 am
by brucetrout
I have to replace a awning window. What, from anyones experience, would be a good caulk to hold it in place and seal it?
All I have to do is slide the new glass into the existing frame. Just want to make sure it doesn't fall out.
Thanks
brucetrout
RE: Window Caulk
Posted: Wed Mar 07, 2007 7:27 pm
by brucetrout
Anyone?
RE: Window Caulk
Posted: Wed Mar 07, 2007 7:34 pm
by Greg
Bruce, I would hit the auto supply store and use windshield adhesive. It comes in black only as far asI know. Use gloves also, it is about impossible to get off of your hands. Greg
RE: Window Caulk
Posted: Wed Mar 07, 2007 9:15 pm
by JD
You could try this DAP 33 glazing material if you are glazing glass into trim. If this is a standard mobile home window, it would have a rubber glazing.
I am not sure what you are doing when you say sliding the glass in. I would think the frame would have to be taken apart.
A real good general purpose sealant for windows in DynaFlex 230. They sell it at Home Depot. This is what I use to install vinyl windows.
JD
http://www.swisco.com/page/SI/CTGY/door ... g-material