Page 1 of 1
No heat
Posted: Mon Nov 19, 2007 1:47 pm
by jgiroux
My mothers furnace is only three years old and now the furnace heats up and only blows cool air.
It is a gas furnace model # DGAA077BATA
All it says on the front of the furnace is Red T Products.
My mother says the furnace acts like it should yet no hot air. Any ideas?
RE: No heat
Posted: Tue Nov 20, 2007 2:38 am
by Robert
Hi,
Does the burner actually light ? If so, could be a blockage in the burner orifice (spider and/or web) for instance.
Could be gas valve problem also.
You could check the orifice, but otherwise will need a Tech to diagnose it.
Thanks,
Robert
RE: No heat
Posted: Tue Nov 20, 2007 8:36 pm
by jgiroux
ya burner lights unit even has the code error but light stays solid green to say no problems found but with what i see everything is how it should be working just 0 hot air coming out with everything working fine
RE: No heat
Posted: Tue Nov 20, 2007 10:13 pm
by Robert
Check that orifice.
Thanks,
Robert