Hi everyone my name is Jesse this is my first post. It is now getting cold here and I needed to turn the heat on.
The furnace(Miller gun model#FS-LS) does nothing when the thermostat is turned on. I hear the thermostat click when I turn it up above room temperature, so I believe that it is functioning correctly. None of the circuits are tripped in the fuse box, and when I press the reset button on the furnace it still does nothing. What am I missing here?
In previous years I have had to bleed the feed line, and then the furnace would work. Last year I had a tech. from the Kero company come and service the furnace, It was running rough and was all gunked up. When he was done(if I remember correctly he replaced the electrodes.) it ran fine all winter. Now it does nothing. I am short on cash now so I would like to check out as many things as I can before I call in a tech. Thanks.
Jesse
Help, My Miller furnace won't turn on.
Hi Jesse,
Welcome aboard. Follow all things done in previous years. Check for power from t-stat to the furnace.
You have to first establish power to furnace which may be lost.
Other than that, I would wait on the Tech due to the experience and tools needed to troubleshoot further.
Thanks,
Robert
Welcome aboard. Follow all things done in previous years. Check for power from t-stat to the furnace.
You have to first establish power to furnace which may be lost.
Other than that, I would wait on the Tech due to the experience and tools needed to troubleshoot further.
Thanks,
Robert
Some people are Humbly Grateful, while some are Grumbly Hateful.................... Which one are you ?
Thanks for the reply. I got it working. I tried a few things and then it would run but not the blower motor. I bled the line and then it started. Thanks again.
Jess
Jess
-
- Similar Topics
- Replies
- Views
- Last post
-
-
Intertherm/Nordyne feh-015ha furnace issues blower not working, unit will only turn off at breaker box
by onmypath78 » Sat Mar 16, 2019 12:11 pm » in Nordyne Service & Repair - 0 Replies
- 163164 Views
-
Last post by onmypath78
Sat Mar 16, 2019 12:11 pm
-
-
-
I need wiring assistance for a miller furnace serial number A0981-0685
by Timodell » Wed Nov 20, 2019 10:40 pm » in Nordyne Service & Repair - 0 Replies
- 64070 Views
-
Last post by Timodell
Wed Nov 20, 2019 10:40 pm
-
-
-
In too deep to turn back now... now what?
by Do it herselfer » Thu Nov 02, 2017 11:28 pm » in Mobile Home Repair - 2 Replies
- 25689 Views
-
Last post by yakima4$
Tue Dec 05, 2017 8:29 pm
-
-
-
have intertherm heat pump with a 913421 control box tying to a miller 841 thermo stat ,
by hillcat01 » Mon Oct 21, 2019 7:28 pm » in Nordyne Service & Repair - 0 Replies
- 84837 Views
-
Last post by hillcat01
Mon Oct 21, 2019 7:28 pm
-
-
-
Fluctuating flue draft Miller CMF2 80 PO CONV
by ctwap2783 » Sat Feb 22, 2020 9:36 pm » in Nordyne Service & Repair - 0 Replies
- 120510 Views
-
Last post by ctwap2783
Sat Feb 22, 2020 9:36 pm
-