The quick backstory is I have a '96 Mascot (1500 sq/ft) with a 2.5 ton heat pump w/ elect. supp. heat. Have never really had any problems and has been a more than ample system, but this summer (SC heat/humidity) I started noticing it didn't seem to have quite the cooling capacity and my bills were higher than normal. I kinda got sidetracked from getting around to having it looked at. Fastforward to the cooler temps of fall and I began to notice it seemed to run a lot more just to keep the house around 70. Well, today the temps dropped and I discovered it was running full time today and the temp wouldn't climb above 65. I called for elect. heat and it came on, but even then it didn't even seem as warm as in the past. I realize it's getting time to have the entire system replaced, but right now I have a call in for someone to come and look and just wanted to have an idea ahead of time for what it could be.
Thanks.
Bryant Heat Pump won't heat or cool
Hi,
Checked underneath home and see if cross over duct is loose, kinked, damaged, etc... .
Also use flashlight and mirror by laying light doen in duct and hold mirror in duct at next register and look toward light to inspect duct.
Has evaporator coil been cleaned ?
Could have developed a leak and have low charge.
Thanks,
Robert
Checked underneath home and see if cross over duct is loose, kinked, damaged, etc... .
Also use flashlight and mirror by laying light doen in duct and hold mirror in duct at next register and look toward light to inspect duct.
Has evaporator coil been cleaned ?
Could have developed a leak and have low charge.
Thanks,
Robert
Some people are Humbly Grateful, while some are Grumbly Hateful.................... Which one are you ?
-
- Similar Topics
- Replies
- Views
- Last post
-
-
swamp cooler in hallway, how to get the rest of my mobile home cool?
by grateful » Mon May 25, 2020 7:30 pm » in All Other HVAC Questions - 0 Replies
- 97850 Views
-
Last post by grateful
Mon May 25, 2020 7:30 pm
-
-
- 0 Replies
- 39516 Views
-
Last post by David DeBord
Sun Oct 22, 2017 7:13 am
-
-
have intertherm heat pump with a 913421 control box tying to a miller 841 thermo stat ,
by hillcat01 » Mon Oct 21, 2019 7:28 pm » in Nordyne Service & Repair - 0 Replies
- 82874 Views
-
Last post by hillcat01
Mon Oct 21, 2019 7:28 pm
-
-
-
Evcon Heat Pump - Air Conditioner Model No. BRHS036B Making HUM Before Starting
by Dave_L » Tue Aug 29, 2023 1:26 am » in Coleman Service & Repair - 0 Replies
- 118524 Views
-
Last post by Dave_L
Tue Aug 29, 2023 1:26 am
-
-
- 0 Replies
- 43701 Views
-
Last post by chrismc_us
Mon Dec 23, 2019 9:00 am