Coleman Evcon DGAT070BDD ignition failure : SOLVED
I'm getting 1 blinking light, and when I look through the window into the furnace, I can see it's definitely not lighting. I don't see any glow at all. I also detect a faint gas odor when it tries to ignite. The heat exchanger has been replaced via the recall program. Any help appreciated, thanks in advance!
Last edited by ejvogie on Mon Oct 26, 2009 5:45 pm, edited 1 time in total.
Hi,
Disconnect connector where the two wires come to from the ignitor inside furnace.
Place meter leads into the furnace end of plug, set t-stat to call for heat and watch and see if after about a minute or so, you read 120VAC for about 35 seconds.
IF you do, ignitor is most likely bad.
Let me know what you read and will give ordering info if needed.
Thanks,
Robert
Disconnect connector where the two wires come to from the ignitor inside furnace.
Place meter leads into the furnace end of plug, set t-stat to call for heat and watch and see if after about a minute or so, you read 120VAC for about 35 seconds.
IF you do, ignitor is most likely bad.
Let me know what you read and will give ordering info if needed.
Thanks,
Robert
Some people are Humbly Grateful, while some are Grumbly Hateful.................... Which one are you ?
-
- Similar Topics
- Replies
- Views
- Last post
-
-
Unit Starts then Stops - Ignition Failure
by Arkady78 » Wed Dec 02, 2020 9:58 am » in Coleman Service & Repair - 0 Replies
- 99187 Views
-
Last post by Arkady78
Wed Dec 02, 2020 9:58 am
-
-
- 0 Replies
- 104787 Views
-
Last post by cwwhite75
Sat Feb 29, 2020 8:46 am
-
-
Colman evcon presidental 7980B856 furnace will not stay on
by ezridersid » Sat Dec 21, 2019 8:52 pm » in Mobile Home Repair - 1 Replies
- 16274 Views
-
Last post by ezridersid
Sat Dec 21, 2019 9:04 pm
-
-
-
Transformer burning out in an Evcon DES 80
by BigDave67s » Wed Dec 29, 2021 10:01 pm » in Coleman Service & Repair - 0 Replies
- 106562 Views
-
Last post by BigDave67s
Wed Dec 29, 2021 10:01 pm
-
-
-
Evcon Heat Pump - Air Conditioner Model No. BRHS036B Making HUM Before Starting
by Dave_L » Tue Aug 29, 2023 1:26 am » in Coleman Service & Repair - 0 Replies
- 116903 Views
-
Last post by Dave_L
Tue Aug 29, 2023 1:26 am
-