When the fan comes on, it makes a loud noise like tires squealing... motor turns easy by hand... motor has oil on rear (side away from shaft)... there are no other signs of oil in furnace unit... I'm thinking a bearing... but it turns freely and makes no noise when turned by hand... oh yea, it does produce air-flow... is there something other than the motor that can produce such a noise, or am I looking in the right direction... would I need a new cap to go w/ a new motor... if I got a generic motor from you, could you supply a color code to match it to the 1468-243p/a motor that I already have?
thanks
mark
blower motor makes loud noise on coleman eb17b furnace unit
-
- Posts: 3
- Joined: Thu May 21, 2009 2:43 pm
"...in god we trust... all others must be verified"
Hi Mark,
Have you removed the blower housing to check blower wheel and motor good ?
If all is ok, a bearing is a good possibility.
Yes, a new run cap will be needed with any new motor.
The wiring diagram on motor will tell what wire is what.
Let me know if ordering info needed.
Thanks,
Robert
Have you removed the blower housing to check blower wheel and motor good ?
If all is ok, a bearing is a good possibility.
Yes, a new run cap will be needed with any new motor.
The wiring diagram on motor will tell what wire is what.
Let me know if ordering info needed.
Thanks,
Robert
Some people are Humbly Grateful, while some are Grumbly Hateful.................... Which one are you ?
-
- Posts: 3
- Joined: Thu May 21, 2009 2:43 pm
have the snail shell out.. all turns well at 100 rpm or so.. only at 1000 rpm does it present a problem... and yes i will be ordering the generic motor an cap... i will make my order monday.. thanks..
"...in god we trust... all others must be verified"
Hi,
Blower Motor # S89-094
Run Capacitor # G21-930
Both can be seen and ordered through PayPal from this page :
http://www.mobilehomerepair.com/Generic ... ml#catalog
Thanks,
Robert
Blower Motor # S89-094
Run Capacitor # G21-930
Both can be seen and ordered through PayPal from this page :
http://www.mobilehomerepair.com/Generic ... ml#catalog
Thanks,
Robert
Some people are Humbly Grateful, while some are Grumbly Hateful.................... Which one are you ?
-
- Posts: 3
- Joined: Thu May 21, 2009 2:43 pm
i installed the new motor.. it ran backwards... changed the directional wires as in the instruction sheet.. still ran backwards.... something fishy about that... any ideas as to what to do next... my father-in-law taught a/c&r at a community college... he said that something could be mis-wired in the motor itself... oh and asap would be nice.. cause it is hot in north carolina...
"...in god we trust... all others must be verified"
Hi,
You'll have to call Mark at the office Monday toll free 1-877-263-7860.
Without being there to test and see it, can't say for sure what is causing it.
Thanks,
Robert
You'll have to call Mark at the office Monday toll free 1-877-263-7860.
Without being there to test and see it, can't say for sure what is causing it.
Thanks,
Robert
Some people are Humbly Grateful, while some are Grumbly Hateful.................... Which one are you ?
-
- Similar Topics
- Replies
- Views
- Last post
-
-
Blower motors makes a humming noise
by Cristy24k » Mon Nov 09, 2020 12:17 am » in Coleman Service & Repair - 0 Replies
- 95897 Views
-
Last post by Cristy24k
Mon Nov 09, 2020 12:17 am
-
-
-
LOUD Blower on Coleman Presidential 2 900759
by AuntKatie » Thu Apr 05, 2018 6:50 pm » in Coleman Service & Repair - 0 Replies
- 42173 Views
-
Last post by AuntKatie
Thu Apr 05, 2018 6:50 pm
-
-
- 2 Replies
- 24196 Views
-
Last post by Mark440
Sun Apr 28, 2019 12:48 pm
-
-
Intertherm/Nordyne feh-015ha furnace issues blower not working, unit will only turn off at breaker box
by onmypath78 » Sat Mar 16, 2019 12:11 pm » in Nordyne Service & Repair - 0 Replies
- 159281 Views
-
Last post by onmypath78
Sat Mar 16, 2019 12:11 pm
-
-
- 2 Replies
- 56934 Views
-
Last post by jazsimpson
Sat Jul 08, 2017 8:16 am