Lipstick on shower surround screws.

Whether it's NASCAR or your family vacation, talk about anything here!

Moderators: Greg, Mark, JD

Locked
Lorne
Posts: 368
Joined: Sat May 19, 2007 7:57 am
Location: Murrells Inlet,SC

Still working on my shower. No real rush.

I found that putting a spot of lipstick on each screw head and then placing the pre-cut piece of sheetrock against them marks where they will bulge out.
I then picked a little depression over each spot and the sheetrock lays flat.
I also us a piece of Masonite ,1 1/2" wide as a furring strip to make up for the 1/8" flange edge. Works great.

Where the sheetrock meets the shower I use a piece of "J" channel and will silicone a tiny bead along it later.
Working out fine so far. Well back to work.
Image
1987 Craftsman Double Wide 42x28,w/attached 28x12 foot enclosed porch/ re-shingled 2 yrs ago. Original exterior vinyl w/no sheathing.
Locked
  • Similar Topics
    Replies
    Views
    Last post