How do you secure your sliding glass door?

Whether it's NASCAR or your family vacation, talk about anything here!

Moderators: Greg, Mark, JD

Locked
SoFlorida
Posts: 67
Joined: Sun Jun 30, 2013 11:59 pm

Sat Aug 24, 2013 4:26 pm

I know how to secure it from the inside, with a piece of a wooden beam, but that's only good when I'm home or if I go out I have to leave by the back door. Which is normally fine but when it's raining I don't want to drip water on my laminate wood floor by walking around to the back door.

Is there a way to secure it other than the lock it comes with from the outside?


User avatar
JeffInFL
Posts: 171
Joined: Wed Apr 24, 2013 6:52 am

Tue Sep 17, 2013 1:27 pm

One of these works:

Image

Is there an existing lock on the outside?

HouseMedic
Posts: 342
Joined: Fri Apr 06, 2007 9:14 am
Location: Delaware
Contact:

Tue Sep 17, 2013 7:50 pm

I like this style the most. Sometimes they put one on the bottom and one on the top of the moving door. You push the pin down into the grove or hole to lock and then just push the front to release when you want it to open. The one in this picture even has a second hole that when you have it in the back hole the door is open about six inches but it still can not be opened any farther.

Ron

Image

Aaronjohn
Posts: 26
Joined: Mon Aug 06, 2012 8:54 am
Location: Toronto
Contact:

Wed Nov 06, 2013 6:48 pm

Have a blocking device in place in the track to prevent the door from being fully opened from the outside. The track-blocker should allow the door to be opened up to six inches, but no farther. All you really to do is to place a strong wooden dowel or metal rod into the track so the door can't be slid open. A more serious option is the "charley bar," a metal bar that attaches to the door frame and extends to the edge of the sliding part of the door. When not in use, the bar folds up out of the way against the frame. There are also track-blocking devices that can be screwed in place.
Aaron John
www.247torontolocksmith.com

Locked