Need some assistance with an Intertherm FEH-012H

Questions about repairs and parts for other brands of furnaces and air conditioners. Please note that our speciality is Coleman and Nordyne products, so our knowledge of other brands may be limited.

Moderators: Greg, Mark

Locked
DrLitebur
Posts: 2
Joined: Fri Jan 13, 2012 2:43 pm

Fri Jan 13, 2012 2:49 pm

Yes, I know, a dinosaur by today's standards, but I need some help trying to figure out what is wrong with my above-listed heater. It will shut off and turn on correctly, but will not blow out heat, instead blowing out the same temperature cold air. It is as if the heating elements are not working right. That is how I would describe it if it were a stove.

I am not sure just how to describe it further. The model is, once again, an Intertherm FEH-012H


User avatar
flcruising
Posts: 606
Joined: Mon Dec 03, 2007 2:18 pm
Location: Florida Panhandle

Fri Jan 13, 2012 3:51 pm

Have you looked at the wiring inside the unit to make sure they are all connected? Look for any burnt wires as well.
[color=blue]Aaron[/color]

DrLitebur
Posts: 2
Joined: Fri Jan 13, 2012 2:43 pm

Fri Jan 13, 2012 5:46 pm

Just did a second exam of the internal wires, and I did not see any damaged, burnt, or otherwise compromised wires. Heck, they almost looked new, like they were replaced recently (just not in the last two years). The unit worked last year, when winter ended, so this has me a little perplexed. I am hoping it will be a simple fix, as I do not have a lot of money to fix it, or have a professional come out to fix it.

User avatar
flcruising
Posts: 606
Joined: Mon Dec 03, 2007 2:18 pm
Location: Florida Panhandle

Sat Jan 14, 2012 11:10 am

Check for voltage on the element side of the sequencer circuit. This of course would require a multimeter.
[color=blue]Aaron[/color]

Ranvar

Wed Feb 01, 2012 10:38 am

Have you managed to solve the problem?


------------
Anytone AT-400C CDMA Cellular Repeater Review?
spy headphones for mobile phone

Locked