Inter City Older Furnace/AC unit No heat

Questions about repairs and parts for other brands of furnaces and air conditioners. Please note that our speciality is Coleman and Nordyne products, so our knowledge of other brands may be limited.

Moderators: Greg, Mark

Locked
dcasey22

model # PGAA18C1K3
manufacture # NPGAA18C1K3
Model inter - city products usa
Furnace has been running since fall, and all of a sudden i noticed on Saturday that the heat signal on the programmable thermostat was flash heat on...and i walked over to the vent and just blowing cold air...Any tips or ideas would be greatly appreciated here in Canada
User avatar
Robert
Moderator
Posts: 6413
Joined: Wed Feb 28, 2007 12:07 am
Location: Tennessee

Hi,

Don't have any data on it, is it an electric furnace ?


Thanks,
Robert
Some people are Humbly Grateful, while some are Grumbly Hateful.................... Which one are you ?
dcasey22

no it is a gas furnace a/c unit combined..outside. In my searching for this brand I found it was bought out by International Comfort products
User avatar
Robert
Moderator
Posts: 6413
Joined: Wed Feb 28, 2007 12:07 am
Location: Tennessee

Hi,

Have that info, but no data on components, specs , etc. which is needed to try and help from here.


Is it a standing pilot light, electronic ignition, etc. ?


Does it have a small booster combustion motor ?



Do you have 24vac at gas valve ?



Thanks,
Robert
Some people are Humbly Grateful, while some are Grumbly Hateful.................... Which one are you ?
Locked
  • Similar Topics
    Replies
    Views
    Last post