No heat...

Questions about repairs and parts for other brands of furnaces and air conditioners. Please note that our speciality is Coleman and Nordyne products, so our knowledge of other brands may be limited.

Moderators: Greg, Mark

Locked
User avatar
Dirty White Boy
Posts: 72
Joined: Sun Dec 09, 2007 7:16 pm
Location: New York

I have a Honeywell kerosene furnace in my MH. Everything was working good until last night...



Was...



I litterly just had the painting done when the next day it stopped working. I noticed they sprayed the louvered door in front of the furnace closet and when I opened up the furnace door to inspect I noticed that there was no "filter" in the main opening (register). The furnace is getting k2 all the way to the head. Is it possible that it could of sucked up paint particles and clogged the jet?
Any help is appreciated...
Top
User avatar
Dirty White Boy
Posts: 72
Joined: Sun Dec 09, 2007 7:16 pm
Location: New York

...it doesn't even fire for a second, just thought I should throw that in there. The filter is clean.
Top
User avatar
Robert
Moderator
Posts: 6413
Joined: Wed Feb 28, 2007 12:07 am
Location: Tennessee

That's a possibility, check all the way to burner to ensure passageways are all open and clear.


Then check for power.



Thanks,
Robert
Some people are Humbly Grateful, while some are Grumbly Hateful.................... Which one are you ?
Top
Locked
  • Similar Topics
    Replies
    Views
    Last post

Return to “Service & Repair of Other Brands”