Hello,
I have an Intertherm FEH-015HA where the HEAT works perfectly when t-stat set to auto and fan/blower set to auto. However, the A/C will only kick on and stay on when the fan/blower is set to the ON position. I've read multiple posts about the opposite problem where the A/C works and it's the heat that has issues, but have yet to see any posts on this. If anybody could direct me to any forum post regarding this issue or just shed some light on the issue I'd greatly appreciate it. I replaced the t-stat, thought maybe the 1986 model DUOTHERM I had was bad, but same issue with the Honeywell, so now I have to troubleshoot the actual unit. Fuses are all good...just don't know where to go from here. Thanks in advance!
DP






