Adding Hard start kit to Nordyne S3QA Series compressor unit

Questions about repairs and parts for Nordyne furnaces, air conditioners and heat pumps for manufactured homes including Intertherm, Mac and Miller brands. Click here for Nordyne parts.

Moderators: Greg, Mark

Locked
CRCrabtree
Posts: 1
Joined: Sun Apr 24, 2011 5:32 pm

Recently purchased hard start kit for this system. Diagram shows a dual Capacitor. It also shows a start relay and capacitor as field wired components but they do not appear to be present on this unit. My sense is that the kit should be wired to that section of the dual capacitor that that connects to the compressor. If you have this diagram, it is the connections labeled "C" and "H". Am I correct ?
Top
Bill
Moderator
Posts: 100
Joined: Mon Mar 07, 2011 9:32 pm

Hi,
Somehow they are wired together, but might not be much help without seeing the wiring diagram for his unit and seeing the instructions with the hard start kit. If you can post the full model number I might be able to look up the wiring diagram for the a/c Thanks
Bill
Please remember to check and change your filters.
Top
Locked
  • Similar Topics
    Replies
    Views
    Last post

Return to “Nordyne Service & Repair”