Electric heat problem?

[bqz]

I'm new here and not sure I'm posting in the right place but I'll throw it out here.

Have an electric furnace (all new to me)and the problem is when I turn it on the coils heat up but blower doesn't always kick on (sometimes it does and sometimes it doesn't) when it doesn't I turn it on manually and the air flow it great but cool .

Question :

1) why doesn't the blower kick on by it self?

2)is it common for electric heat to blow cool like that?

Central Electric Furnace
Intertherm 76,000 btu
Model # FEH-023HR-03
Appliance code E0000022091
Date code 870515

Please not it is an older furnace but has been used a season or two,has been setting for years but still like new.

[Robert]

Hi,

Moving this to the Nordyne Service & Repair forum. Follow it there please.



Thanks,
Robert

[Robert]

Hi,

Most likely a faulty sequencer. It controls the blower and elements.

When it does work and blows cold air, most likely not all elements are working.

Sequencer # 901076 @ $57.00 + $6.75 shipping.


It can be seen and ordered from left column here through Paypal:

http://www.mobilehomerepair.com/NordyneElec.html



OR, by calling between 9AM/5PM CST Mon thru Fri toll free to

1-877-263-7860 and charging to Visa or Mastercard.



If you're in Canada, let us know for added info.




Thanks for inquiring,
Robert

[bqz]

"The sequencer" controls both the elements and blower,is this correct??

Now the big question, where is it located and is it a simple matter of turning off the power and disconnecting and reconnecting the wires?I guess I could find it but a diagram would be cool,know where I can find one by chance?

[Robert]

It is inside controls boxed in area near the elements.



You can order a Parts & Wiring Diagram for email delivery here:

http://www.mobilehomerepair.com/wireandparts.html



Just remove wires and reconnect at same place.


Usually 2 screws hold it on.



Thanks,
Robert

[bqz]

Thanks for your help Robert

[Robert]

You're very welcome.


Take care and best wishes,
Robert