Nordyne E1EH-012HA
-
- Posts: 1
- Joined: Fri Dec 14, 2018 8:19 am
My furnace short cycled and stopped working. I have replaced the sequencer, the limit switch, the control panel and it’s wiring harness. At this point, if the breaker is on, the elements come on but not the blower unless I turn it to on rather than auto. The thermostat seems to have no affect at all and I have one ordered. Any help is most appreciated. I started from complete ignorance of how it works and I’m certainly not an electrician. I just remember to respect it! Lol
-
- Posts: 5
- Joined: Thu Nov 22, 2018 1:33 am
Not very familiar with that unit, but I would be looking on the way side of a bimetal limit switch being fried, once you find the two for the blower circuit on is for over temp shutdown and one is to turn the fan on when desired temp is reached, both can be checked for approximate function with a torch and a volt ohm.
-
- Posts: 5
- Joined: Thu Nov 22, 2018 1:33 am
Removed from the unit of course. It does not mean they are accurate just that they aren't totally wasted.
-
- Similar Topics
- Replies
- Views
- Last post
-
-
Nordyne Mod. E1EH-015HA split unit/eliminate cooling?
by carolina jim » Thu Oct 24, 2019 8:33 am » in Nordyne Service & Repair - 0 Replies
- 39199 Views
-
Last post by carolina jim
Thu Oct 24, 2019 8:33 am
-
-
-
Nordyne M1MB clicks 4 times when starting
by olsonlaaa » Thu Aug 24, 2017 10:54 am » in Nordyne Service & Repair - 0 Replies
- 47213 Views
-
Last post by olsonlaaa
Thu Aug 24, 2017 10:54 am
-
-
-
Help with Nordyne electronic board
by swade1991 » Thu Aug 02, 2018 12:13 pm » in Nordyne Service & Repair - 0 Replies
- 32752 Views
-
Last post by swade1991
Thu Aug 02, 2018 12:13 pm
-
-
-
Intertherm/Nordyne feh-015ha furnace issues blower not working, unit will only turn off at breaker box
by onmypath78 » Sat Mar 16, 2019 12:11 pm » in Nordyne Service & Repair - 0 Replies
- 166848 Views
-
Last post by onmypath78
Sat Mar 16, 2019 12:11 pm
-
-
-
Nordyne M1B1 furnace issue - thermostat c wire not hooked up correctly. It's running off atteries instead
by Tallestt » Mon Apr 20, 2020 6:27 am » in Nordyne Service & Repair - 1 Replies
- 42920 Views
-
Last post by taurolyon
Tue Jun 23, 2020 4:02 pm
-