I do have a wiring diagram, on the unit itself. I took some pictures of it with 2 digital cameras and neither one made pictures that you could read. I have tried to find one online and wasn't able to.
I did finally get the pilot to light, but that is all it will do now is run the pilot. I was reading the wrong numbers on my multi-meter, I do have 24 VAC on the T1 and T2 to the reignitor module but was still not getting any spark until I jumpered 115 VAC from the fan switch.
On the gas control valve I have 2 wires running to it, one runs to a switch on the damper assembly the other runs from the upper limit switch. The one running from the limit switch has no signal. The one running to the damper motor has 24 VAC.
So the pilot is now lit and it runs, but it won't send any more gas with a call for heat.