well according to the schematic the wires are correct.. so im at a loss as to what might be going on.. thanks for advice.

No its not a heat pump system, it can take ac,, but its a normal electric furnace.. a year ago or so it did give me some problems, an element did burn out, it was replaced and the sequencer was replaced. It has worked fine since then, but last month it started to act up. not shutting down, (hot as h...

yes it is a match , i took the part number from the manual in the furnace and matched it with the number from this site and the tech also matched it. I also since i posted replaced the fan relay also from this site, and the local hardware for a thermostat.. still the same thing. I will double check ...

Hi, well i had noticed the furnace wasn't running right, either it wouldnt start auto by the thermostat, or it would run till it was manually shut down. it does respond to the thermostat, but again it wont stop till i manually turn it off. I noticed that after i shut it down the blower motor would c...

Hi, last year i had an issue with the sequincer, which on yur reccomendation i replaced, it did help out. with the issues of fan not starting, however, it didn't really improve the heat output of the unit, it does heat the home, but the fan runs for at least an hour or longer, with gently warmed air...

So ok this is what is going on, i have a couple issues, maybe or not related. 1. First i noticed that the elements were kicking on and off, but the blower wasn't always coming on. To explain it was intermittent slowly getting worse over last winter. I found that a gentle tap in the area with the blo...