Behind the door was insulation that blew away when the door swung open in a storm. I am going to replace should I get foil face? I've heard it's not a good idea to put those snug insulating blankets around it, but to just leave a big piece of loose insulation in front of it and close the door. Corre...

I have a 1980 home and used Window World about 5 years ago. A basic window w/installation was about $184. However I opted for Low E glass Argon. I replaced the kitchen bow window for a very large casement and a large good size window in the master bedroom and two regular size in the front entry room...

I am researching which to buy. Any suggestions? I have an electric one and seeing pricing around $16-$22 and they saying go with minimum of R8. Installation seems pretty basic. True?
Thanks in advance!
Sharon

The 23x60 is a common size but there are several sizes. Also be sure the door is vented at the bottom. When installing the door, it may be close but not quite the exact same fit. If a small amount of wood framing will be exposed, you can add some type of angle metal to the edge of the rough opening...

Well aren't you resourceful Brenda. I'll stick with the time savings of ordering one. But what a good idea on the diverter I'll look into that as well.

Any suggestions of where to buy one? I went online and found a couple places and they are about $129.99 and $28 to ship to NH. Looks like the sizes are 20x60 or 23x60. I just went and measured and it looks to be the 23x60. Do I measure the actual door? These two must be the standard sizes? I'm assum...

I know JD is the expert here on roofs, and I'll welcome any ideas. The addition on my MH has a flat roof and it's metal. Every year I have gone up there and applied the silver rubber roof coating, as I was told to do. When shoveling snow off the roof last winter most of it got scraped off. This roof...