Brand "Coleman"

Model Number
3500A812

Volts/HZ/Phase
240vac/60/1

Thanks,
Louie

Hi Robert, Model 901282 And it has a 12 hole/pin molex plug. Just remembered i had this picture i took. This the inside of the electrical box screwed to the outside of the blower housing. http://mobilehomerepair.com/phpbb/userpix/2446_P2080001_2.jpg You can see the female molex plug for the male plu...

I recently purchased a blower motor (Model Number 1468-120P) from your company and i have question. The motor has 4 wires 1 red 1 orange and 2 blacks. Now i know i have the red and orange wire in the correct spot on the molex plug. Now my question is about the black wires. I know which spot on the m...

Robert,

I was looking at the list of parts you gave and the motor you listed looks like it has to many wires.

It looks like it has 6 wires including ground, where my existing motor only has 5 wires including ground.


Thanks
Louie

Robert,

Yes i have heat and a/c with a separate outside a/c unit.

And yes you are correct on the isolator kit.


Thanks
Louie

Robert, Sorry i have not gotten back sooner but have been very sick past few days. Now as far as my problem,i did not pay attention to whether the motor was hot or not, and the fan seems to spin fairly easy. Never known for motors to have play in the bearings. I have not had the same problem since i...

I was woke up early this morning by a squealing noise coming from the furnace,when i went to check i noticed you could hit the the blower housing a little bit and it would quite. But you could still hear it doing it a little bit - sometimes barely, sometimes really loud and sometimes not at all. I s...

Robert, Just to give you an update,yes the element on the top string in the back was touching the frame. So i bent them back up plus a little extra. All though I found it easier to remove the elements instead of the blower. Are there any ceramic fittings that i can add to the frame to prevent this i...

Robert, I got the sequencer and limit switches like you suggested and it's doing the same thing. As soon as i turn the power back on the elements start glowing and the fan will not run. When i turned the power back on the t-stat was set to off it was not on heat or cool. What do i need to check next...

Robert, After more reading i noticed that the heating elements do have limit switches. So let me describe the problem i am having. When i came home from work yesterday i noticed it was extremely hot inside and the t-stat said it was 85 degrees, it is set at 70 degrees. I went to check the furnace an...

Robert, Thanks for the quick reply. So you think it's a bad Sequencer and not a bad limit switch,or does my model not have limit switches. I would like to order the part if that is what you suggest is the problem. Unfortunately i will not be ordering through paypal do to bad past experience of havin...

I have a coleman evcon furnace in a mobile home and i noticed the fan was not running and the heating elements would not turn off, i had to switch off the breaker to the furnace to make the elements turn off. What could the problem be? Brand "Coleman" Model Number 3500A812 Volts/HZ/Phase 2...