Coleman Chimneys & Ductwork
More Coleman Parts
gas furnace parts,
electric furnace parts,
blend air parts,
a/c parts,
filters & misc
Other
generic parts,
furnace manuals,
Nordyne parts,
electrical parts,
NOS parts,
ordering policies,
mobile home parts
|
|
$10 International Order Surcharge
If ordering from Canada, you MUST ADD this $10 UPS surcharge to your cart for your order to be processed. This does not include any duties which may be charged at time of delivery. Roof jacks will require about $50 extra shipping. $10 Int'l Shipping Surcharge
|
 |
|
|
|
|
4000-7101C Standard Roof Jack 10"-19"
Adjustable from 10"-19" when measured from roof (not ceiling) to top of furnace. This 4000 series roof jack is used on almost all Coleman gas furnaces including CGAT, COAS, COAT, DGAA, DGAH, DGAM, DGAT, DGPA, DGPH, DGPT, DLAS, 7900 and 7600 models. For older furnaces, check your data plate or
e-mail us. Swivel flashing allows installation on roof pitches ranging from 0/12 to 5/12. Installation instructions included. Outside pipe is 8-1/4" which fits over about an 8" pipe on the furnace. Inside pipe is 5-1/4" which fits over about a 5" pipe on the furnace. Your price $129.00.
View instruction sheet.
|
 |
|
4000-4241 Hydroment Sealant
Apply to underside of roof jack flashing during installation and at swivel joint. Your price $12.18.
|
 |
|
4000-7121C Roof Jack 15"-26"
Standard roof jack same as above except adjustable from 15"-26". Your price $139.00.
|
|
|
7680B6541 Exterior Roof Jack Extension
Extends crown of roof jack up an extra 18 inches to clear drifting snow or down drafts which may cause pilot outages. For use with 4000 series Coleman roof jacks. Not adjustable. Installation instructions included. Your price $50.00.
View instruction sheet.
|
 |
|
4000-7141C Roof Jack 23"-44"
Standard roof jack same as above except adjustable from 23"-44". Oversize shipping applies. Your price $169.00.
|
|
|
7900A6111 Interior Roof Jack Extension 11"
Interior roof jack extension lengthens roof jack connection to furnace by 11". Extension not adjustable but roof jack is. Your price $58.00.
|
 |
|
4000-7151C Roof Jack 30"-56"
Standard roof jack same as above except adjustable from 30"-56". Oversize shipping applies. Your price $189.00.
|
|
|
7900A6171 Interior Roof Jack Extension 17"
Interior roof jack extension lengthens roof jack connection to furnace by 17". Extension not adjustable but roof jack is. Your price $58.00.
|
|
|
4000-6941C Crown Assembly
Crown assembly for a standard roof jack. Outside pipe is 8-1/2" which fits over an 8-1/4" pipe. Inside pipe is 5-1/2" which fits over a 5-1/4" pipe. Attaches with three screws (not included). Be sure your old crown is removable. If not, order complete roof jack. Your price $74.00.
View instruction sheet.
|
 |
|
4000-5441C Crown Cap
Roof cap for top of crown assembly. Pipe size is 5-3/8" which fits over a 5" pipe. Connects with two screws (not included). Your price $40.00.
|
 |
|
Duct Connector
Connects a downflow furnace to the ductwork underneath it. To specify the correct size, measure from the top of the floor to the top of the duct. Secure to floor and bend fingers inside duct opening. Opening size is 12" x 14". Total size is 18" x 18". Depths available are 2", 4.5", 6.5", 7.5", 8.5", 10.25", 11", 12", 12.25" and 14". Include depth size in notes when ordering. Your price $42.00.
|
 |
|
7660-2841 Ceiling Ring
Metal ceiling ring fits around furnace pipe to seal gap where furnace pipe protrudes through the ceiling. Also used to meet fire code. Two pieces for easy installation. Fits around an 8" pipe. Screws not included. Your price $9.00.
|
 |
|
Damper
Damper is located underneath furnace and fits inside above duct connector. Opens automatically when furnace blower comes on. Shuts when furnace blower shuts off. When the furnace is not used,
the damper keeps air from ductwork from coming back up inside the furnace. Damper is often used when separate a/c units don't require use of the furnace blower. A 12" x 12" minimum opening in duct needed to use damper. Total size is 17.5" x 18". Your price $49.00.
|
 |
|
|
|
We ship all our own parts. If you ever have a problem, you deal
directly with us, not a third-party drop-shipper.
|
|
#5054 8" Insulated cross-over flex duct
Used underneath home to connect ductwork in multi-section homes. 25' long. Your price $48.00.
|
 |
|
#5056 10" insulated cross-over flex duct
Used underneath home to connect ductwork in multi-section homes. 25' long. Your price $59.00.
|
|
|
#5058 12" Insulated cross-over flex duct
Used underneath home to connect ductwork in multi-section homes. 25' long. Your price $68.00.
|
|
|
#5060 14" insulated cross-over flex duct
Used underneath home to connect ductwork in multi-section homes. 25' long. Your price $78.00.
|
|
|
#5062 16" Insulated cross-over flex duct
Used underneath home to connect ductwork in multi-section homes. 25' long. Oversize shipping applies. Your price $89.00.
|
|
|
|
We sincerely hope that the information and service we've provided
will earn your business. Thank you for your patronage.
|
| |
Click Here to request a quote on a Coleman part you don't see listed.
Please include part number (if known) and model number of furnace.
You will receive a response within hours.
Please note that some older part numbers do change, which we can help you with.
|
| |
|
; void(true);)
; void(true);)
; void(true);)
; void(true);)
; void(true);)
; void(true);)
; void(true);)
; void(true);)
; void(true);)
; void(true);)
; void(true);)